Purchase RCR-Force 12

SKU: switch-pros-rcr-force-12
RCR-Force 12
Power gain Up To
+0 HP

Torque gain Up To
+0 TQ

Advertised gains are estimates of HP and Torque “at the engine” calculated from gains as measured on a Dynojet Dynamometer in ideal conditions and typically show the largest possible change. Actual gains are dependent on the following: Learn More about Crank HP Vs Wheel HP

Model – Manufacturers use the same engine in multiple model vehicles and often times they are in a different state of tune, for example: 2008 C63 and a 2008 CLK Black Series. Both have the same engine, but the C63 has 451hp while the CLK63 has 500hp. Naturally the C63 will show more gains as it starts at a lower level.

Model Year – Similar to above, as time progresses, Manufacturers tend to slightly increase power output via software from one year to the next or offer “Performance Packages” with increased power. The engines remain largely unaltered and as a result, final tuned output remains the same, while the gains are lower as the starting point is now higher.

Fuel – Fuel quality is HIGHLY important with performance vehicles. Low quality and/or low octane fuel will greatly impact engine output and potentially even engine health. Top tier brand premium fuels should always be used to achieve the best results possible.

Drivetrain – All wheel drive has higher drivetrain losses than rear wheel drive. This results in lower numbers when testing on a chassis dyno. Wheel/tire size and weight will also impact chassis dyno results

Weather/Conditions – Temperature, humidity, altitude, and air density all impact engine performance. Heat, high humidity, and thin air will all work towards reducing engine output

Engine Health – Higher miles tends to result in increased build up and lower compression which can and will impact engine output. Properly maintained engines will have better performance than abused or neglected engines.

Supporting modifications – The highest power levels require supporting modifications. Depending on the engine, this could mean forged internals, built transmission, upgraded fuel system, 110+ octane race fuel, etc.
Please confirm:
NOT LEGAL FOR SALE OR USE ON POLLUTION CONTROLLED MOTOR VEHICLES
Learn why

Confirmation
Please confirm that you are not installing this product within the United States.

This policy only applies to installers and/or users who are in the United States, customers who reside in other countries should act in accordance with their local laws and regulations.

Some Weistec Engineering performance upgrades may solely be used on vehicles in sanctioned competition which may never be used upon a public road or highway, unless permitted by specific regulatory exemptions (such as a CARB E.O.). For state specific details please visit the following website. http://www.semasan.com/emissions

It is the responsibility of the installer and/or user of the product to ensure that it is used in compliance with all applicable laws and regulations. If a product was purchased in error, do not install and/or use it. The purchaser must arrange to return the product(s) for a full refund.

All performance modifications and installations are at the customer’s own risk. Weistec Engineering holds no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance products.
$1,078.00 $1,078.00
QTY:
Prop 65 warning

Warning
This product can expose you to chemicals including carbon black, silica - crystalline, formaldehyde, and lead which are known to the State of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Product details

Manufacturer

Switch-Pros

Vehicle application

year	make	model
2024	Rivian	R1S
2023	Rivian	R1S
2022	Rivian	R1S
2021	Rivian	R1S
2024	Rivian	R1T
2023	Rivian	R1T
2022	Rivian	R1T
2021	Rivian	R1T
See more

Product Description

Kit Includes

The Kit includes several components to enhance your communication and power control system. It consists of an 11' communication cable that connects the switch panel to the power module. Additionally, a power cable with a 150A inline fuse is provided for safe and reliable power supply. The package also includes 125 user-selectable legends in a horizontal orientation, allowing you to customize and label your switches as needed.

For installation convenience, the kit offers installation brackets and hardware, making the setup process easier. The color-coded output wires simplify wiring tasks, ensuring proper connections. Moreover, a wire harness with waterproof, sealed automotive-grade connectors is provided, ensuring durability and protection against environmental elements.

Functionality and Panel Uses

The switches within the kit offer a range of programmable functions. You can utilize the preset dimming function with memory, enabling brightness adjustment from 100% to 10% with the ability to recall the previously set level. The master mode allows you to control multiple outputs simultaneously, conveniently turning them on or off with a single touch. Each master switch can control up to four other switch outputs, providing flexibility in managing your system.

Furthermore, the switches offer an on-on-off logic configuration, touch panel lockout feature, and support for both on/off or momentary actions. You can choose between ignition or battery input, allowing for versatile power source options. Additionally, the switches provide flash or strobe functionality, complete with user-selectable strobe patterns and easy one-touch activation. With the automatic power-up feature upon vehicle start-up, you can ensure a seamless operation without manually turning on the switches.

The kit also includes a safety lockout feature for specific switches, providing an added layer of security. Lastly, the time delay off functionality allows for automatic switch deactivation after a specified period.

Key Features

12 user-programmable switches
RCR-TOUCH® switch cover (United States Design Patent No. US D922,969 S)
Waterproof, solid state power module
Built-in Bluetooth module
Program and operate accessories with phone or tablet
Free app for iOs and Android platforms
System can be used to start vehicle
No bulky relay box
RGB Backlighting with unlimited color options
Three External Trigger inputs can each activate up to four outputs (Active Hi or Active Low)
150amp capacity with 17 outputs
- 4 rated @ 35A and 1 rated @ 30A (High In-Rush circuits)
- 11 rated @ 15A, which can be combined for larger loads
- 1 Low Side driver switch, rated @ 2A

Detailed Specifications

Switch Panel Specs

RCR-Touch® cover, snaps on for ease of specific switch selection while wearing gloves or riding rough terrain (United States Design Patent No. US D922,969 S)
Switch Panel enclosure measures 4” L x 3” W x .375” H (United States Design Patent No. US D914,614 S)
Splash proof with Polycarbonate overlay faceplate
Pre-machined for factory-look installation
RGB backlighting
Orange LED switch indicators
6 Programmable LED Status indicators

Power Module Specs

17 Outputs: 4 rated @ 35A, 1 rated @ 30A, 11 rated @15A, 1 Low Side rated @ 2A
150A maximum rating
7”L x 3.5”W x .5”H (excluding connectors)
Waterproof and Solid State
Underhood rated 125° to -40°C
LED Ignition Input Status Indicator

RCR-Force 12

Power gain Up To

Torque gain Up To