Walker Evans Racing Can-Am Maverick X3 Walker Links or Rear Sway Bar Shocks

This Sway Bar Shock Kit will help soak up bumps and improve overall cornering stability of your X3 UTV allowing you to feel safe while riding. Use these Walker Evans Racing X3 Rear Sway Bar Shock Kit to propel your X3-RS Maverick UTV to the next level and pass up the competition. Replacing the rigid sway bar end links with the Walker Evans Racing “Walker Links” provide you with increased performance and confidence while driving your X3 UTV to the next level.

These Sway Bar Links are now designed as an energy absorbing shock absorber which replaces your OEM standard fixed sway bar links which provide a smoother ride over uneven terrain regardless of vehicle speed. They increase the front or rear wheel and vehicle articulation depending upon the installation location. These Can Am X3 Sway bar Shocks will providing a positive feeling when cornering. With 2.0″ of dampened action per side, your rear shocks will be able to act independently until the Walker Link has collapsed to act like a hard link under heavy loads and when cornering. You get the best of both worlds with these links, a more independent shock action when your vehicle is level or nearly level and a solid support under heavy lean angles while cornering.These Walker Links replace the standard rear sway bar end links. The Rear Sway Bar Shocks provide the same amount of roll control while freeing up the movement of the rear wheels. Removal of the rear sway bar end links allows the rear suspension to act with improved independence. This freedom of movement allows the inside rear tire to stay planted into the ground under high cornering loads. The Walker Links also produce improved traction and handling of the UTV. You get rid of the traditional feeling of unpredictable handling and sliding when the sway bar loads up and then releases its energy. You will now be able to feel where the limit of control is and drive your UTV will better control and predectibility.

Why does my Can Am X3 need a pair of X3 Links?

These Walker Links replace the standard rear sway bar end links. The Sway Bar Shocks provide the same amount of roll control while freeing up the movement of the rear wheels. Removal of the rear sway bar end links allows the suspension to act with improved independence. This freedom of movement allows the inside rear tire to stay planted to the ground under high cornering loads. The Walker Links also produce improved traction and handling of the UTV. You get rid of the traditional feeling of unpredictable handling and sliding when the sway bar loads up and then releases its energy. You will now be able to feel where the limit of control is. This Sway Bar Shock kit is an upgrade anyone can appreciate, as it takes the roughness out of the rear end while providing increased cornering stability and better traction.

What is the installation process like for the Walker Links?

Installation of the Sway Bar Shocks is was very easy. Just remove the stock end links and replace them with the Walker Links. The Walker Links are installed using the factory end link bolts and the shock spacers. Just pull the old links off, and use the same bolts to put the Walker Links back on in the same locations. With the included shock spacers, the link installation is a straightforward process.

The Walker Evans Racing Walker Links - Sway Bar Shock for Can Am Maverick X3 UTV contains:

• One set of two 400-00-003 Can-Am Maverick X3 Rear Sway Bar Shocks

Features of the Walker Links Rear Sway Bar Shocks:

• Made in the USA
• Re-Valve able and Re-Buildable
• 16 Position Adjustable Compression Reservoir
• 5/8" Micro-Alloy Steel Nitride Coated Shock Shafts
• Anodized for Protection and Long Life
• Billet Aluminum Design
• 2" Shock Body Design
• 1/2" Steel Bearing and Urethane Bushing Shock Ends Standard
• Designed to bolt into the OEM End Link Mounting Points
• High Quality Fit, Function, and Appearance